Boat Trailer Hub Galvanized 5 Lug fits 2,000 lb. axles 1 1/16in Bearings

Tired of rusted old trailer hubs? Get yourself into a Hot-Dipped Galvanized Trailer Hub. This hub is great for boat trailers and will hold up to the elements. This hub is typically seen with trailer tire sizes ranging from 8 inch to 13 inch. This Galvanized Trailer Hub fits on a straight spindle. Check the bearing sizes to ensure you match up the proper bearings. Fits 2000-2500lb Axles Includes hub, bearings, and seals Outer Bearing Number 44649, 1 1/16 inch inner diameter Inner Bearing Number 44649, 1 1/16 inch inner diameter The Grease seals included in this kit are a 1 1/4″ Inner Diameter Seal and a 1 1/2″ Inner Diameter Grease Seal. You will only use one of these Sizes on your Axles Spindle. We include both for customer convenience, as sometimes it is very difficult to know which is needed. On the Axles we sell, they use the 1 1/2 Grease Seal. Test Fit both on your trailers spindle, and discard the one that will not fit. Only one Grease seal is used per hub. Bolt Pattern 5 on 4.5 Rated to 1250 lbs. each If you’ve ever experienced difficulty installing dust caps, check out this 1.98 Trailer Dust Cap installation Tool for much easier installation.