8 inch Galvanized Keel Roller Bracket for Boat Trailer

This 8 inch Hot-Dipped Galvanized Roller Bracket is designed to fit 8 inch Keel or Straight Rollers . You will commonly see these mounted to cross-members along the center line of the boat, both towards the rear and front of the boat. To create the assembly shown in the picture. Check out the 8 inch Stoltz Keel Roller or 8 inch Black Rubber Keel Boat Roller to select a replacement size. We have Stainless Steel Roller Shaft 9.5 inch longand Zinc Plated Boat Trailer Roller Shaft 9.5 inch long 5/8 inch Diameter to mount the new roller into the roller bracket. Use 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts to secure the roller onto the roller shaft. Slotted for adjustments to fit crossmembers up to 4 inches Tall, the U-Bolts typically for a 3 inch x 3 inch cross member are 1/2 inch x 3 inch x 4 5/16 available above in both Hot-Dipped Galvanized or Stainless Steel. Check out our Boat Trailer U-Bolts and Trailer Bolts for additional sizes you may need for mounting your roller bracket. Also adjust the height of the roller to raise or lower for best positioning