ALUMINUM FENDER BRACKETS
- THESE BRACKETS ARE MADE FROM 2” WIDE ALUMINUM FLAT BAR.
- MEASUREMENTS ARE TOTAL LENGTH OF FLAT BAR BEFORE THE ENDS ARE BENT.
- THE LONG BEND IS 3” LONG AND THE SHORT BEND IS 2” LONG
- MEASURE THE FLAT BAR BETWEEN THE BENDS AND ADD 5” TO GET APPROXIMANT LENGTH.
- THESE BRACKETS ARE USED ON TANDEM AND TRIPLE AXLE TRAILERS WITH SPRING AXLES.
- THESE ARE NOT MADE TO USE WITH TORSION AXLES.
