Boat Trailer 3 x 3 Tongue 3/16 inch Galvanized Steel 94 inches Long

The Boat Trailer Tongue is an integral part to your Trailer’s Frame. Typically this item is used when building a trailer, but you may also be able to use it to replace or repair a damaged Tongue section of your trailer. This is a Heavy Duty piece of 3/16″ thick Galvanized Steel Beam that is 94″ in length and 3″ x 3″ tubing. It has no pre-drilled holes or bracketry for installation. If you need additional hardware, please be sure to check our Boat Trailer Hardware Category to help complete your project. The Trailer Tongue has many uses, primarily it is used as the connection point between your trailer and your tow vehicle. This is because the coupler is often mounted to the end of the Trailer Tongue. Along with the coupler, a Trailer Tongue section may have a Trailer Jack, Winch Post/Stand, Spare Tire Carrier, Electric Over Hydraulic Actuator, or other parts installed to it. Specifications: – 3/16″ Thick – Galvanized Steel Construction – 3″ x 3″ x 94″ – No Pre-Drilled Holes & No Included Hardware